View TVL-55737GD030J-LW-G-AAN_8939354.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TVL-55737GD030J-LW-G-AAN ver.b -1- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t approval sheet J J J J customer ?Q part no. a?? tvl-55737gd030j-lw -g-aan transmissive type positive mode 3.0 tft lcd product type a? 262k color zrohs G?a? non-compliance compliance remarks ] preliminary specification ? final specification ?? signature by customer: ?_J : approved by issued by qa checked by qa checked by pm qa bu
TVL-55737GD030J-LW-G-AAN ver.b -2- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t specification of lcd module product no.: tvl-55737gd030j-lw -g-aan issue date: 2013/02/21 kyocera display corporation 5-7-18, higashinippori arakawa-ku , tokyo 116-0014, japan tel: +81-3-5811-8780 fax: +81-3-5811-8782
TVL-55737GD030J-LW-G-AAN ver.b -3- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t table of contents 1. general description ................................ ................................ 5 2. features ........................................... ............................................ 5 3. mechanical specification ........................... ........................... 5 4. mechanical dimension............................... ............................... 6 5. maximum ratings .................................... .................................... 6 6. electrical characteristic.......................... .......................... 6 7. backlight characteristic ........................... .......................... 6 8. module function description ........................ ...................... 6 8.1. pin description .................................... ................................................... .............6 8.2. block diagram of lcd ............................... ................................................... .......6 8.3. timing characteristics............................. ................................................... .........6 8.4. power on flow chart ................................ ................................................... ........6 8.5. display on sequence................................ ................................................... .......6 8.6. display on/off flow ................................ ................................................... ..........6 8.7. standby mode sequence.............................. ................................................... ....6 9. optical characteristics ............................ ............................ 6 10. reliability........................................ ............................................. 6 10.1. tests.............................................. ................................................... ...............6 10.2. color performance .................................. ................................................... ......6 11. inspection criteria ................................ ................................... 6 11.1. inspection conditions .............................. ................................................... .....6 11.2. light method ....................................... ................................................... ..........6 11.3. classification of defects .......................... ................................................... ....6 11.4. sampling & acceptable quality level................ ..............................................6 11.5. definition of inspection area ...................... ................................................... ..6 11.6. items and criteria ................................. ................................................... ........6 12. precautions for use ................................ ................................ 6 12.1. safety ............................................. ................................................... ..............6 12.2. storage conditions ................................. ................................................... ......6
TVL-55737GD030J-LW-G-AAN ver.b -4- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 12.3. installing lcd module.............................. ................................................... .....6 12.4. precautions for operation.......................... ................................................... ..6 12.5. handling precautions............................... ................................................... .....6 13. illustration of lcd date code(kyocera display) ..... ... 6 14. rohs compliant warranty............................ ......................... 6 15. precautions for use ................................ ................................ 6 15.1. safety ............................................. ................................................... ..............6 15.2. storage conditions ................................. ................................................... ......6 15.3. installing lcd module.............................. ................................................... .....6 15.4. precautions for operation.......................... ................................................... ..6 15.5. handling precautions............................... ................................................... .....6 15.6. guarantee.......................................... ................................................... ...........6 16. revision history................................... ...................................... 6
TVL-55737GD030J-LW-G-AAN ver.b -5- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 1. general description TVL-55737GD030J-LW-G-AAN is a trans-missive type co lor active matrix liquid crystal display (lcd), which uses amorphous thin fi lm transistor (tft) as switching devices. this product is composed of a tft lcd pane l, driver ic, fpc backlight and a bezel unit. the following table described the featu res of TVL-55737GD030J-LW-G-AAN. 2. features display mode transmissive type, display format rgb vertical stripe color 262k color input data mcu interface 16 bits 8080-series parallel interface viewing direction higher contrast ratio: 6 oclock less gray scale reversal:12 oclock backlight white led driver ic s6d04d3x21 3. mechanical specification item specifications unit dimensional outline 43.48(w) 74.9(h) 1.9 (d) mm resolution 240 rgb 400 dot active area 38.88 (w) 64.8 (h) mm pixel pitch 0.162 (w) 0. 162 (h) mm
TVL-55737GD030J-LW-G-AAN ver.b -6- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 4. mechanical dimension giantplus technology co.,ltd display scale 60/1 gr b 240xrgbx400 dots sus to insulation tape sus to connector guide line 1 2 37 36 sus to frame mylar tape test pad (au silk print) silicone applied to cover trace ,but not ic peeling tape component area (h=1.0 max.) recommended viewing angle in use connector: elco 04-6293-637-005-829+
TVL-55737GD030J-LW-G-AAN ver.b -7- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 5. maximum ratings if the operating condition exceeds the following ab solute maximum ratings, the tft lcd module may be damaged permanently. values item symbol min. max. unit condition power supply for analog vcc -0.3 4.6 v power supply for digital iovcc -0.3 4.6 v storage temperature t st -30 80 c operating temperature (ambient temperature) t op -20 70 c humidity - - 90 %rh note 1 note1: t a Q 40 without dewing note2: a. all of voltage listed above are with respective to gnd=0v. b. device is subject to be damaged permanently if s tresses beyond those absolute maximum ratings listed above. 6. electrical characteristic typical operating conditions (gnd=avss=0v) item symbol condition min. typ. max. unit v dd 2.6 2.8 3.3 v lcm supply voltage v ddio 1.7 -- 3.3 v v ih 0.7v dd3 --- v dd3 input voltage v il 0 --- 0.3 v dd3 v v oh 0.8v dd3 --- v dd3 output voltage v ol 25 0 --- 0.2 v dd3 v power consumption i dd 1 --- --- 33 ma consumption current of iled-a iled --- --- 20 --- ma led/pcs
TVL-55737GD030J-LW-G-AAN ver.b -8- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 7. backlight characteristic item symbol min typ max units surface luminance l s 7300 --- cd/m 2 surface brightness uniform l d 80% --- --- % led voltage v led 3.0 --- 3.4 v led current (pcs) i led --- 20 30 ma 1 backlight led circuit 2 uniform measure condition (a) to measure 9 point. measure location is sho w below (b) uniform = (min. brightness / max. brightnes s) 100% (c) best contrast, main and sub panel all dots turn on (white screen) notes: v led is led chip forward voltage the voltage for led chip only. active area 2w/3 h/3 2h/3 w/3 active area (h) 1 2 4 3 5 7 6 9 8
TVL-55737GD030J-LW-G-AAN ver.b -9- issue d ate: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 8. module function description 8.1. pin description no pin name description 1 gnd ground 2 pwm pwm output for back light control of led driv er. 3 te tearing effect output pad to synchronize mpu to fra me writing, activated by s/w command. 4~19 d0~d15 16-bit parallel data bus for 80-system interface 20 bs1 select the mpu system interface mode (note1) 21 /wr write signal pin 22 /rd read signal pin 23 /res reset pin 24 /cs main panel chip select pin 25 rs register select signal pin 26 id_maker_high id pin : iovcc 27 iovcc power supply for digital 28 vci power supply for analog 29 gnd ground 30~35 vled_cathode6~1 led6 (-)~led1 (-) power input pin 36 vled_anode led + power input pin 37 gnd ground note 1 bs1 main panel mpu-interface mode index data 1 16-bit interface db[7~0] db[15~0] 0 8-bit interface db[7~0] db[7~0]
TVL-55737GD030J-LW-G-AAN ver.b -10- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 8.2. block diagram of lcd driver & controller (ic) 240rgb*400 tft lcd gate signal source signal 37 1 mpu & power i/f
TVL-55737GD030J-LW-G-AAN ver.b -11- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 8.3. timing characteristics
TVL-55737GD030J-LW-G-AAN ver.b -12- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 8.4. power on flow chart
TVL-55737GD030J-LW-G-AAN ver.b -13- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 8.5. display on sequence
TVL-55737GD030J-LW-G-AAN ver.b -14- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t
TVL-55737GD030J-LW-G-AAN ver.b -15- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 8.6. display on/off flow 8.7. standby mode sequence display off display on display off display on display off r07h cmd(l) 1017 r07h cmd(l) 1017 r07h cmd(l) 0000 r07h cmd(l) 0000 display on standby in mode display off flow write ddram r10h cmd(l) 0001 r10h cmd(l) 0001 r10h cmd(l) 0000 r10h cmd(l) 0000 wait 120ms(or more) standby out mode wait 50ms r07h cmd(l) 0000 r07h cmd(l) 0000 r07h cmd(l) 1017 r07h cmd(l) 1017 wait 50ms
TVL-55737GD030J-LW-G-AAN ver.b -16- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 9. optical characteristics led backlight transmissive module: (normal polarize r) item symbol temp. min. typ. max. unit conditions tf 25 -- 10 15 ms response time tr 25 -- 20 30 ms =0 , =0 (note 2) contrast ratio cr 25 300 400 -- -- =0 , =0 (note1) led:on,light:off uniformity -- -- 80 -- -- % -- color temperature -- -- 5000 7000 9000 k -- luminance of white -- -- 300 -- -- cd/ O i led =20ma/led transmittance t 25 -- 5.5 -- -- f 25 20 visual angle range front and rear b 25 50 degree =0 ,cr R 10 led:on, light:off (note 3) l 25 40 visual angle range left and right r 25 40 degree =90 ,cr R 10 led:on, light:off (note 3) v isual angle direction priority -- -- 12 gray scale inversion (note4) cie(x, y) chromaticity transmissive item symbol min. typ. max. conditions x 0.58 0.63 0.68 red y 0.29 0.34 0.39 x 0.34 0.39 0.44 green y 0.51 0.56 0.61 x 0.10 0.15 0.20 blue y 0.00 0.05 0.10 x 0.28 0.33 0.38 white y 0.28 0.33 0.38 =0 , =0 bm-5a 1 angle ntsc % 49% 54% --
TVL-55737GD030J-LW-G-AAN ver.b -17- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t for lcm note 1: definition of contrast ratio (cr). contrast ratio is calculated with the following for mula. note 2: response time definition note 3 : ? ? ? definition 100 % black white white brightness (%) time (ms ) rise time, tr decay time, td 10 % (positive type) 9 0 %
TVL-55737GD030J-LW-G-AAN ver.b -18- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t note 4: visual angle direction priority note 5: optical measurement equipment setup -measurement should be executed in a stable, windle ss, and dark room(under 10 lunx). after lighting the backlight for 30mins. humidity=6015% -distance : 50cm -photodetector : bm-5 (field 1 o )
TVL-55737GD030J-LW-G-AAN ver.b -19- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 10. reliability 10.1. tests no. item condition criterion 1 high temperature operating 70 96 hrs 2 low temperature operating -20 96 hrs 3 high temperature non-operating 80 96 hrs 4 low temperature non-operating -30 96 hrs 5 high temperature/ humidity non-operating 60 ,90%rh 96 hrs 6 temperature shock non-operating -30 80 (30min) (5min) (30min) 24 cycles 7 electro-static discharge hbm: 2kv no defect of operational function in room temperature are allowable(235c). leakage current should be below double of initial value. note 1: test after 24 hours in room temperature (235c). note 2: the sampling above is individually for each reliability testing condition. note 3: the color fading of polarizing filter shoul d not care. note 4: all of the reliability testing chamber abov e, is using d.i. water.(min value: 1.0 m -cm) note 5: in case of malfunction defect caused by esd damage, if it would be recovered to normal state after resetting, it would be judged as a good part. 10.2. color performance no. item criterion (initial) 1 luminance >50% 2 ntsc >70% 3 contrast ratio >50%
TVL-55737GD030J-LW-G-AAN ver.b -20- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 11. inspection criteria 11.1. inspection conditions 11.1.1. environmental conditions the environmental conditions for inspection shall b e as follows room temperature: 235c humidity: 5020%rh 11.1.2. the external visual inspection with a single 1000 200 lux fluorescent lamp as the light source, the inspe ction was in the distance of 30cm or more from the lcd to the inspectors eyes. 11.2. light method 11.2.1. environment lamp under 1000 200 lux, viewing direction for inspection over 30cm 11.2.2. the distance from eye to defect around 300m m, the distance from nd filter to defect around 25~30mm eye 300mm defect place nd filter
TVL-55737GD030J-LW-G-AAN ver.b -21- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 11.3. classification of defects 11.3.1. major defect a major defect refers to a defect that may substant ially degrade usability for product applications. 11.3.2. minor defect a minor defect refers to a defect which is not cons idered to be able substantially degrade the product application or a defect that deviates from existing standards almost unrelated to the effectiv e use of the product or its operation. notes: if the lcd/lcm s cosmetic and display perfo rmance do not specify in inspection criterion, it should be based on these delivered samples. 11.4. sampling & acceptable quality level level ii, mil-std-105e major minor cosmetic 1.0 % 1.5 % electrical-display 0.4% 0.65 % 11.5. definition of inspection area v.a: viewing area a.a: active area active area viewing area outside of viewing area
TVL-55737GD030J-LW-G-AAN ver.b -22- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 11.6. items and criteria 11.6.1. visual inspection criterion in cosmetic (1) glass defect no defect criteria remark 1 dimension (minor) by engineering diagram x y z 2 cracks (major) extensive crack reject (2) lcm appearance defect within a.a no defect criteria remark spec. permissible qty Q 0.10mm disregard 0.10mm< Q 0.20mm 3 1 round type (minor) 0.20mm< 0 1. =(l+w)/2, l: length, w: width 2. disregard if out of a.a. spec. permissible qty w Q 0.03mm disregard l Q 3.0mm and 0.03mm0.10mm or l>3.0mm 0 1. l: length, w: width 2. disregard if out of a.a. spec. permissible qty Q 0.20mm disregard 0.20mm< Q 0.30mm 2 3 polarizer bubble/ dent (minor) 0.30mm< Q 0.50mm 1 1. =(l+w)/2 , l: length, w: width 2. disregard if out of a.a. w l l w l w
TVL-55737GD030J-LW-G-AAN ver.b -23- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 0.50mm< 0 (3) fpc no defect criteria remark 1 copper peeling (minor) copper peeling reject (4) black tape no defect criteria remark 1 shift (minor) ic exposed reject 2 no black tape (minor) no black tape reject (5) silicon no defect criteria remark 1 amount of silicon (minor) ito exposed reject (6) bezel no defect criteria remark 1 oxidized spot (minor) oxidized spot, rust reject 2 outline deformation (minor) by engineering diagram 3 greasiness (minor) greasiness reject 4 spots, round type (minor) h Q by engineering diagram disregard h=total height (thickness ) 5 plating (minor) bubble, peeling reject (7) power cord no defect criteria remark 1 power cord (minor) power core loose
TVL-55737GD030J-LW-G-AAN ver.b -24- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 11.6.2. visual inspection criterion in electrical d isplay lcm electrical criterion no defect criteria remark 1 no display (major) not allowed 2 missing line (major) not allowed 3 darker or lighter line (major) not allowed spec. permissible qty bright point 1 4 bright / dark point (minor) dark point 2 1: 1sub-pixel : 1r or 1g or 1b 2: point defect area R 1/2 sub pixel. spec. permissible qty Q 0.10mm disregard 0.10mm< Q 0.20mm 3 5 round type (minor) 0.20mm< 0 1. =(l+w)/2, l: length, w: width 2. disregard if out of a.a. spec. permissible qty w Q 0.03mm disregard l Q 3.0mm and 0.03mm0.10mm or l>3.0mm 0 1. l: length, w: width 2. disregard if out of a.a. 7 mura (minor) by 5% nd filter invisible note1 issues that are not defined in this document shall be discussed and agreed with both parties. (customer and supplier) l w w l
TVL-55737GD030J-LW-G-AAN ver.b -25- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t note2 unless otherwise agreed upon in writing, the criter ia shall be applied to both parties. (customer and supplier) 12. precautions for use 12.1. safety (1) do not swallow any liquid crystal, even if ther e is no proof that liquid crystal is poisonous. (2) if the lcd panel breaks, be careful not to get liquid crystal to touch your skin. (3) if skin is exposed to liquid crystal, wash the area thoroughly with alcohol or soap. 12.2. storage conditions (1) store the panel or module in a dark place where the temperature is 235c and the humidity is below 5020%rh. (2) store in anti-static electricity container. (3) store in clean environment, free from dust, act ive gas, and solvent. (4) do not place the module near organics solvents or corrosive gases. (5) do not crush, shake, or jolt the module. (6) do not exposed to direct sun light of fluoresce nt lamps. 12.3. installing lcd module attend to the following items when installing the l cm. (1) cover the surface with a transparent protective plate or touch panel to protect the polarizer and lc cell. 12.4. precautions for operation (1) viewing angle varies with the change of liquid crystal driving voltage (vo). adjust vo to show the best contrast. (2) driving the lcd in the voltage above the limit will shorten its lifetime. (3) response time is greatly delayed at temperature below the operating temperature range. however, this does not mean the lcd will be out of the order. it will recover when it returns to the specified temperature range. (4) when turning the power on, input each signal af ter the positive/negative voltage becomes stable. (5) do not apply mater or any liquid on product, wh ich composed of t/p.
TVL-55737GD030J-LW-G-AAN ver.b -26- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 12.5. handling precautions (1) avoid static electricity that can damage the cm os lsi; please wear the wrist strap when handling. (2) the polarizing plate of the display is very fra gile. so, please handle it very carefully. (3) do not give external shock. (4) do not apply excessive force on the surface; it may cause display abnormal. (5) do not wipe the polarizing plate with a dry clo th, as it may easily scratch the surface of plate. (6) do not use ketonics solvent & aromatic solvent, use with a soft cloth soaked with a cleaning naphtha solvent. (7) do not operate it above the absolute maximum ra ting. (8) do not remove the panel or frame from the modul e. do not apply mater or any liquid on product, which composed of t/p.
TVL-55737GD030J-LW-G-AAN ver.b -27- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 13. illustration of lcd date code(kyocera display) tbd
TVL-55737GD030J-LW-G-AAN ver.b -28- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 14. rohs compliant warranty rohs hazardous substances including: cd< 100 ppm pb< 1000 ppm hg< 1000 ppm cr +6 < 1000 ppm pbde < 1000 ppm pbb < 1000 ppm 15. precautions for use 15.1. safety (4) do not swallow any liquid crystal, even if ther e is no proof that liquid crystal is poisonous. (5) if the lcd panel breaks, be careful not to get liquid crystal to touch your skin. (6) if skin is exposed to liquid crystal, wash the area thoroughly with alcohol or soap. 15.2. storage conditions (7) store the panel or module in a dark place where the temperature is 235c and the humidity is below 5020%rh. (8) store in anti-static electricity container. (9) store in clean environment, free from dust, act ive gas, and solvent. (10) do not tear off the vacuum treatment package b efore assembling. (11) do not place the module near organics solvents or corrosive gases. (12) do not crush, shake, or jolt the panel or modu le. (13) do not exposed to direct sun light of fluoresc ent lamps. 15.3. installing lcd module attend to the following items when installing the l cm. (2) cover the surface with a transparent protective plate or touch panel to protect the polarizer and lc cell. (3) when assembling the lcm into other equipment, t he spacer to the bit between the lcm and the fitting plate should have enough height to avoid causing stress to the
TVL-55737GD030J-LW-G-AAN ver.b -29- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t module surface, refer to the individual specificati ons for measurements. the measurement tolerance should be 0.1mm. 15.4. precautions for operation (6) viewing angle varies with the change of liquid crystal driving voltage (vo). adjust vo to show the best contrast. (7) driving the lcd in the voltage above the limit will shorten its lifetime. (8) response time is greatly delayed at temperature below the operating temperature range. however, this does not mean the lcd will be out of the order. it will recover when it returns to the specified temperature range. (9) when turning the power on, input each signal af ter the positive/negative voltage becomes stable. (10) do not apply mater or any liquid on product, w hich composed of t/p. 15.5. handling precautions (9) avoid static electricity that can damage the cm os lsi; please wear the wrist strap when handling. (10) the polarizing plate of the display is very fr agile. so, please handle it very carefully. (11) do not give external shock. (12) do not apply excessive force on the surface; i t may cause display abnormal. (13) do not wipe the polarizing plate with a dry cl oth, as it may easily scratch the surface of plate. (14) do not use ketonics solvent & aromatic solvent , use with a soft cloth soaked with a cleaning naphtha solvent. (15) do not operate it above the absolute maximum r ating. (16) do not remove the panel or frame from the modu le. (17) do not apply mater or any liquid on product, w hich composed of t/p.
TVL-55737GD030J-LW-G-AAN ver.b -30- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 15.6. guarantee 15.6.1. the period is within 12 months since the da te of shipping out under normal using and storage conditions. 15.6.2. any defect not caused by kyocera display is not guaranteed to the customer. the defect phenomenon should be agreed by both parties.
TVL-55737GD030J-LW-G-AAN ver.b -31- issue date: 2013/02/21 r r r o o o h h h s s s c c c o o o m m m p p p l l l i i i a a a n n n t t t 16. revision history version revise record date a new version 2012/03/07 b viewing direction remark 2012/04/24

▲Up To Search▲

Price & Availability of TVL-55737GD030J-LW-G-AAN

	To Download TVL-55737GD030J-LW-G-AAN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .